August Meeting WSPR Mode Presentation/Demo

At the QSY meeting on Tuesday I will be doing a presentation and demo of WSPR Weak Signal Propagation reporter. Runs QRP so it is good for all. I will explain how to use it for your own propagation and antenna studies/evaluation.

See http://wsprnet.org and http://physics.princeton.edu/pulsar/K1JT/ for some reading before the meeting.

If someone has a portable MP-1 vertical, hamstick or buddipole, anything else thats a quick setup (for 30m QRP) I can have it running live on 30m where most activity occurs, otherwise I will run on 20m with my hamsticks.

To see the propagation reporter database go here:

http://wsprnet.org/meptspots.php?mode=html&band=all&limit=50&findcall=kc2qfr&findreporter=kc2qfr&sort=date

It should come up live for my call but if not put my call in as follows then push go to see how the system works for reporting.

Search for call:
Show spots heard by:

You can also go to wsprnet.org and do the same thing (database link).
Click activity to see who is on what band.

73 de Fred KC2QFR

Getting ready for Spring & Summer OPs

With the warmer weather approaching I figured its time for change. Enter the Icom IC 703+:


Just picked it up from HRO last week and can’t wait to start backpacking with it! For a qrp rig it seems to fit me better than my FT 817 but weighs a ton! First impression seemed good – I like the dsp features and built in auto “tuner”. I also like the low current drain compared to the 817, ~300-350ma on receive with muted audio, tx at 5 watts is about 1.5 amps, 10 watts is around 2 amps with a load voltage of ~13.5 volts. This rig can also run off of ~9.6 volts and still put out 4 to 5 watts which works for me as I happen to have some spare vex 9.6v nicad 1A power packs not being used(another battery pack to be built!).

Still the 817 has its place as a portable 6m, 2m, and 70cm all mode rig with just the basics. Just yesterday I took it to the top of Mt. Taurus for some weekend spring qrp action:


Even the 817 still weighs a bit – any serious operating will require an external power source – I use a homebrew 2A 12v regulated battery pack. This adds considerable weight and you’ll begin to feel it in no time when trekking about. For an antenna I just use 22g speaker wire that I had laying around as an end fed wire to my homebrew t transmatch. I usually work on 20m , 10m, 6m, and 2m – give me a call if you hear me!

I’ve finally gotten around to fixing up that nice 1919 Vibroplex Original, here it is:


I replaced the feet since they were worn out with ones found at Home Depot – at the time they had only white feet, a bit oversized but they actually work far better than the stock ones and they manage to hold their grip pretty well. Can’t wait to start operating some more after this semster is out! Until then,

73 de KC2BNX

Tom Perry, W2BIS SK 3/15/2009

WAPPINGERS FALLS – Thomas R. Perry, 66, a Town of Wappinger resident for 30 years, entered into eternal rest on Sunday, March 15, 2009, at Vassar Brothers Medical Center in Poughkeepsie. Born Sept. 16, 1942 in Greenpoint, Brooklyn, Mr. Perry graduated from Martin Van Buren High School in Queens in 1961 and with Honors from New York Technical College in Brooklyn in 1963. Upon graduation, Mr. Perry was hired by IBM, beginning his career as a Technician at the IBM Research Center in Yorktown and retiring as an Advisory Engineer in 1992. During retirement, Mr. Perry (a licensed small engine aircraft pilot since 1989) enjoyed flying “7605 Golf” (his own Cessna 172) as well as several Cessna airplanes owned by the Grasshoppers flying club, of which he was a member for many years. Also an avid motorcycle enthusiast, Mr. Perry spent many hours riding his beloved 1989 Honda Goldwing, whom he affectionately nicknamed “Leroy.” Perhaps Mr. Perry’s greatest passion, however, was Ham Radio. Initially licensed in 1958 as WA2BIS, Mr. Perry held an Extra Class license for the past 23 years under the call sign W2BIS. Known by many as “Tommy Tech,” there was not a transceiver, receiver, transmitter, microphone, speaker, antenna or amplifier that he could not repair or refurbish. He will sorely be missed by the boys on “535,” and by the many, many individuals for whom he generously donated his time and knowhow to help resuscitate their ailing rigs and components through the years. Mr. Perry’s survivors include his loving wife and soul mate of nearly 45 years, Marilyn Perry, daughter, Dr. Donna Perry and her husband, Dr. Jonathon Amith of Gettysburg, PA, son, Thomas Perry of Highland and son, Michael Perry of Wappingers Falls. Other survivors include his two beautiful granddaughters, Kathleen Rose Perry and Alana Kiri Amith, both of whom will dearly miss their Grandpa, sisters, Eunice Chelosky of Plainview, NY, Patricia McMahon of East Northport, NY and Geraldine Holt and her husband, Ronald Holt of West Islip, NY, as well as many nieces, nephews and friends. Calling hours will be 2-4 and 7-9 p.m., Thursday, March 19, at the Delehanty Funeral Home, 64 E. Main St., Wappingers Falls. A Mass of Christian Burial will be celebrated 10 a.m., Friday, March 20 at St. Mary’s Church, Wappingers Falls. Burial will follow in St. Mary’s Cemetery. Published on March 17, 2009 in the Poughkeepsie Journal.

Tom Perry at QSY Society Field Day 2007 Tom Perry W2BIS from his file at QRZ.com